GMP型螺旋氣流磨是我公司采用德國及美國進口技術研發而成，是為了對藥用粉體進行粉體化處理而設計的，產品的D97粒徑可低至2~3微米。分塊易清洗的經典設計更保證了整個設備清理的簡便與徹底性，特點在于簡便的操作、優異的清潔度及很少的旋轉部件。特別適用于醫藥行業的實驗室操作，可以加工各類藥品，包括 、原料藥、中間體、輔料等。
同時，開發的新型生產線保留了所有經時間驗證的優點并綜合了新的特點以達到制藥工業的要求，如易拆除，易清洗和 ，能達到CIP和SIP的生產能力。
由于醫 料的活性越來越強，以及不可知性，在新藥研發過程中，我們建議客戶把設備集成在某種程度的隔離系統中，保護操作人員。我們可以提供完整的解決方案。
◆GMP01
·極低的批次粉碎產量，少3g起可投入使用
Smallest output for one batch, and 3g at least fora production
·極高的收集效率，產品99%可收集
Highest collection efficieney, and 99% of productcan be collected
·自分級裝置，產品粒度d50:1~100μ之間可調
Self-classifying device, produet size variablebetween d50:1~100 micron
·用于新藥研發和貴重藥品生產
Used for new medicine development and expensivemedicine production
·無任何轉動部件，拆裝清洗極為方便
No any rotation part, and very easy to dismantleand clean
·粉碎用氣量僅用0.5m3/min
Compressed air consumption is only 0.5m3/min
·可集成在隔離罩中
Can be integrated inside the isolation cover
·極少的占地空間，設備可參考右側示意圖，也可非標定制
With little floor space, the equipment can referto the schematic diagram on the right or can becustomized without standard
◆GMP02
·自分級裝置，產品粒度d50:1~100μ之間可調
Self-classifying device, product size variable be-tween d50:1~100 micron
·極高的收集效率，產品99%可收集
Highest collection efficiency,and 99% of productcan be collected
·小時產量根據細度不同，一般在2~20kg/hr
Production capacity differs to the product fine-ness, normally around 2~20kg/hr
·適合注射級無菌藥的生產
Suitable for the production of axenic medicine forinjection
·無任何轉動部件，拆裝清洗極為方便
No any rotation part, and very easy to dismantleand clean
·可實現CIP/SIP(可選擇)
CIP/SIP design available(at your choice)
·極少的占地空間，設備可參考右側示意圖，也可非標定制
With little floor space, the equipment can refer to the schematic diagram on the right or can be customized without standard
